完整版本: BT的ROUTER如何同时连接两台电脑？
请教各位,我是用的BT YAHOO的宽带,使用BT Voyager 205 ADSL Router. 原来我一直使用USB接口上网.现在我想将另一台电脑通过Ethernet共享宽带,请问如何连接?另一台电脑需要重新用BT的安装盘安装一遍吗?有什么设置上应该注意的地方?请大家指点.
the easiest way is using a CROSS wire to connect another pc with urs which connects to internet via usb. config ur pc to share that internet connection and both pcs should be able to access internet. however, ur pc need to be on when another pc can access internet.
as an alternative, use a hub/switch to build a local network (includes ur pc and other pcs) then connect the hub with router via ethernet. then if all being well, it should work, and ur pc no need to be always on. hahaaa, better, isn't it?
good luck!!
as an alternative, use a hub/switch to build a local network (includes ur pc and other pcs) then connect the hub with router via ethernet. then if all being well, it should work, and ur pc no need to be always on. hahaaa, better, isn't it?
good luck!!
谢谢指点。如果我将ROUTER后的ETHERNET口和第二台电脑的网卡直接连接，这样第二台电脑能上网吗？需要不需要重新安装BT的宽带安装盘呢？
| QUOTE (Legendibm @ 3 Mar 2005, 23:49) |
| 谢谢指点。如果我将ROUTER后的ETHERNET口和第二台电脑的网卡直接连接，这样第二台电脑能上网吗？需要不需要重新安装BT的宽带安装盘呢？ |
if all being well, it will work in that way as i know. i am not sure if u need to reinstall the programmie in another pc since i never used it b4, however, according to its production introduction on the BT's website, (http://www.voyager.bt.com/205/prodinfo.htm). it says that the router can connect two pcs to internet via one usb and one ethernet.
谢谢你的回复。今天早上我把ETHNERNET和电脑后的局域网接口用BT提供的网线连接，然后将IE的设置改为自动获得IP址，一切搞定。 
再次谢谢。
再次谢谢。
great, and enjoy it, good luck
其实BT的光盘完全不用装，所需要的只是usb driver而已，可以单独下在或者安装的。
关于BT这个router的问题我以前贴过一个帖子，最好hack一下否则不好用
另外BT网站上现在有新的firmware可以升级了
关于BT这个router的问题我以前贴过一个帖子，最好hack一下否则不好用
另外BT网站上现在有新的firmware可以升级了
谢谢你的贴子。我正是看了你的帖子以后才知道要将IE调整为自动获取IP地址的。再次感谢各位的耐心帮助。我非常开心呢。 
这是我们论坛页面的一个简化版本.查看包含更多信息的完整版本请您点击这里.